SIC + PE Level 4 Plate – The Armor Standard for Durability
Protection level: IV NIJ
Size: 25 x 30 x 2.5 cm (custom)
Protection area: 0.075m2
Weight: 2.7 + 0.05 kg
Color: black (custom)
Level IV body armor that is NIJ - can stop the following bullets:
· AK47 – 7.62 x 39 API (armor-piercing round)
· 7.62 x 54 R (the bullet used in the popular DRAGUNOV sniper rifle)
· 5.45 x 39
· 5.56 x 45 (.223 Rem) M855
· 7.62 x 51mm NATO
SIC+ PE
MilitaryArm®
Level IV Ceramic Plate (SIC + PE) NIJ .06 Certified
Level IV is the highest armor rating under NIJ standards. Armor plates in this level are tested to take a single hit from an armor-piercing rifle up to . 30-06 M2AP with a mass of 166 grains and velocity of 2880 ft/s and large-caliber rounds.
Material:
+10 mm Alumina Ceramic
+12 mm UHWMPE
+comfort foam on the edge & back of the panel
Size: 25 x 30 x 2.5 cm (as requested)
Protection area: 0.075m2
Weight: 2.7 + 0.05 kg
Color: black (as requested)
Ballistic proception:
Type IV compliance for hard armor inserts or plates requires that specimens be tested in a conditioned condition with .30 caliber armor-piercing (AP) bullets (US military designation M2 AP) with a specified weight of 10.8 g (166 gr) and a velocity of 878 m /s ± 9.1 m/s (2880 ft/s ± 30 ft/s).
Level IV have been designed to effectively eliminate projectiles of the following types:
· AK47 – 7.62 x 39 API (armor-piercing round)
· 7.62 x 54 R (the bullet used in the popular DRAGUNOV sniper rifle)
· 5.45 x 39
· 5.56 x 45 (.223 Rem) M855
· 7.62 x 51mm NATO, M80 - .308
Thus, when a bullet hits a body armor, it is caught in what is known as "web" of very strong fibers. These fibers absorb and dissipate the impact energy that is transferred to the body armor from the bullet, causing the bullet to deform. Additional energy is absorbed by each subsequent layer of material in bulletproof vests until the projectile stops.
Because the fibers work together both in a single layer and with other layers of material in the vest, a large area of body armor is involved in preventing bullet penetration. This also helps to dissipate forces that can cause non-penetrating injuries to internal organs.
Certificates:
Each bulletproof product is certified. The products are tested by independent, external entities.
Supply Ability: 5 000 pieces per month
Lead time:
Quantity (pieces): 1 – 1000 / 15 days
Quantity (pieces): 1001 – 5 000 / 30 days
Lead time (days): 15-30. To be negotiated
Logo customization: min. order of 50 pieces
Graphic customization: min. order of 50 pieces
NOTE:
Each offered product can be adapted to the customer's needs.
Material design, color, and size depending on customer requirements.
© 2010-2023 MilitaryArm, or its affiliates. All rights reserved.
Military Factory - Guangzhou, China.
Level IV Ceramic Plate (SIC + PE) NIJ .06 Certified
Level IV is the highest armor rating under NIJ standards. Armor plates in this level are tested to take a single hit from an armor-piercing rifle up to . 30-06 M2AP with a mass of 166 grains and velocity of 2880 ft/s and large-caliber rounds.
Material:
+10 mm Alumina Ceramic
+12 mm UHWMPE
+comfort foam on the edge & back of the panel
Size: 25 x 30 x 2.5 cm (as requested)
Protection area: 0.075m2
Weight: 2.7 + 0.05 kg
Color: black (as requested)
Ballistic proception:
Type IV compliance for hard armor inserts or plates requires that specimens be tested in a conditioned condition with .30 caliber armor-piercing (AP) bullets (US military designation M2 AP) with a specified weight of 10.8 g (166 gr) and a velocity of 878 m /s ± 9.1 m/s (2880 ft/s ± 30 ft/s).
Level IV have been designed to effectively eliminate projectiles of the following types:
· AK47 – 7.62 x 39 API (armor-piercing round)
· 7.62 x 54 R (the bullet used in the popular DRAGUNOV sniper rifle)
· 5.45 x 39
· 5.56 x 45 (.223 Rem) M855
· 7.62 x 51mm NATO, M80 - .308
Thus, when a bullet hits a body armor, it is caught in what is known as "web" of very strong fibers. These fibers absorb and dissipate the impact energy that is transferred to the body armor from the bullet, causing the bullet to deform. Additional energy is absorbed by each subsequent layer of material in bulletproof vests until the projectile stops.
Because the fibers work together both in a single layer and with other layers of material in the vest, a large area of body armor is involved in preventing bullet penetration. This also helps to dissipate forces that can cause non-penetrating injuries to internal organs.
Certificates:
Each bulletproof product is certified. The products are tested by independent, external entities.
Supply Ability: 5 000 pieces per month
Lead time:
Quantity (pieces): 1 – 1000 / 15 days
Quantity (pieces): 1001 – 5 000 / 30 days
Lead time (days): 15-30. To be negotiated
Logo customization: min. order of 50 pieces
Graphic customization: min. order of 50 pieces
NOTE:
Each offered product can be adapted to the customer's needs.
Material design, color, and size depending on customer requirements.
© 2010-2023 MilitaryArm, or its affiliates. All rights reserved.
Military Factory - Guangzhou, China.
