Al203
MilitaryArm®
Level III Ballistic Plate (Al203)
Our NIJ level 3 (III) plate is tested against NIJ standard 0101.06 against 6 shots from a 7.62x51 cartridge. Level 3 (III) plates was tested during specific conditions, tested with a 7.62 mm FMJ, steel jacketed bullet. (US M80), with a mass of 9.6g (147 gr) and at a speed of 847 m/s +- 9.1 m/s (2780 ft/s +- 30 ft/s).
Material:
+20 mm Al203
+comfort foam on the edge & back of the panel
Size: 25 x 30 x 2 cm (as requested)
Protection area: 0.075m2
Weight: 1.6 + 0.05 kg
Color: black (as requested)
According to the NIJ, Level 3 body armor will stop the following bullets:
· .38 Special
· 9mm Luger
· .40 S&W
· .45 ACP
· .357 Sig
· .357 Magnum
· .44 Magnum
· 7.62x51mm (M80)
Features
· Ultra-lightweight protection against the AK47 and 7.62 x 51 NATO ball
· Mutli-hit protection
· Buoyant neutral (floats in water)
· Drop tested
· Water, oil and vibration resistant
· Temperature, altitude and pressure stable
· Black ballistic nylon coating
· Standard sizes available
· Bespoke sizes on large orders
Thus, when a bullet hits a body armor, it is caught in what is known as "web" of very strong fibers. These fibers absorb and dissipate the impact energy that is transferred to the body armor from the bullet, causing the bullet to deform. Additional energy is absorbed by each subsequent layer of material in bulletproof vests until the projectile stops.
Because the fibers work together both in a single layer and with other layers of material in the vest, a large area of body armor is involved in preventing bullet penetration. This also helps to dissipate forces that can cause non-penetrating injuries to internal organs.
Certificates:
Each bulletproof product is certified. The products are tested by independent, external entities.
Supply Ability: 5 000 pieces per month
Lead time:
Quantity (pieces): 1 – 1000 / 15 days
Quantity (pieces): 1001 – 5 000 / 30 days
Lead time (days): 15-30. To be negotiated
Logo customization: min. order of 50 pieces
Graphic customization: min. order of 50 pieces
NOTE:
Each offered product can be adapted to the customer's needs.
Material design, color, and size depending on customer requirements.
© 2010-2023 MilitaryArm, or its affiliates. All rights reserved.
Military Factory - Guangzhou, China.
Level III Ballistic Plate (Al203)
Our NIJ level 3 (III) plate is tested against NIJ standard 0101.06 against 6 shots from a 7.62x51 cartridge. Level 3 (III) plates was tested during specific conditions, tested with a 7.62 mm FMJ, steel jacketed bullet. (US M80), with a mass of 9.6g (147 gr) and at a speed of 847 m/s +- 9.1 m/s (2780 ft/s +- 30 ft/s).
Material:
+20 mm Al203
+comfort foam on the edge & back of the panel
Size: 25 x 30 x 2 cm (as requested)
Protection area: 0.075m2
Weight: 1.6 + 0.05 kg
Color: black (as requested)
According to the NIJ, Level 3 body armor will stop the following bullets:
· .38 Special
· 9mm Luger
· .40 S&W
· .45 ACP
· .357 Sig
· .357 Magnum
· .44 Magnum
· 7.62x51mm (M80)
Features
· Ultra-lightweight protection against the AK47 and 7.62 x 51 NATO ball
· Mutli-hit protection
· Buoyant neutral (floats in water)
· Drop tested
· Water, oil and vibration resistant
· Temperature, altitude and pressure stable
· Black ballistic nylon coating
· Standard sizes available
· Bespoke sizes on large orders
Thus, when a bullet hits a body armor, it is caught in what is known as "web" of very strong fibers. These fibers absorb and dissipate the impact energy that is transferred to the body armor from the bullet, causing the bullet to deform. Additional energy is absorbed by each subsequent layer of material in bulletproof vests until the projectile stops.
Because the fibers work together both in a single layer and with other layers of material in the vest, a large area of body armor is involved in preventing bullet penetration. This also helps to dissipate forces that can cause non-penetrating injuries to internal organs.
Certificates:
Each bulletproof product is certified. The products are tested by independent, external entities.
Supply Ability: 5 000 pieces per month
Lead time:
Quantity (pieces): 1 – 1000 / 15 days
Quantity (pieces): 1001 – 5 000 / 30 days
Lead time (days): 15-30. To be negotiated
Logo customization: min. order of 50 pieces
Graphic customization: min. order of 50 pieces
NOTE:
Each offered product can be adapted to the customer's needs.
Material design, color, and size depending on customer requirements.
© 2010-2023 MilitaryArm, or its affiliates. All rights reserved.
Military Factory - Guangzhou, China.
